Makita DTD155RTE 2 X 18V 5.0AH LI-ION Brushless Impact Driver

• 3-mode operation for A-mode / Hard mode / Soft mode for multiple applications.
• A-mode allows for easy driving screws with good control, elimitating screw cam-out and cross threading by driving at low speed until tightening start.
• 2-speed power selection switch (0-1,600 / 0-3,900 RPM & 0-1,300 / 0-3,000 IPM) provides the user with precise fastening control for a wide range of applications.
• BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge. 

Specifications

• Capacity Machine screw : M4 – M8 (5/32″ – 5/16″)
• Standard bolt : M5 – M14 (3/16″ – 9/16″)
• Hgh tensile bolt : M5 – M12 (3/16″ – 1/2″)
• Coarse thread (in Length): 22 – 90mm (7/8″ – 3-1/2″)
• No Load Speed (rpm) Hgh / Low: 0 – 3,900 / 0 – 1,600
• Impact per Mintue (ipm) Hgh / Low: 0 – 3,000 / 0 – 1,300
• Max. fastening torque 135 N·m (1,200 in.lbs.)
• Dimension 135x79x232mm
• Driving shank 6.35mm (1/4″)
• Net Weight 1.2 kg (2.6 lbs)

 

Color: Blue

Weight(KG): 1.200